FW851 FIRE ALARM ISOLATION MODULE The FW851 isolator module isolates the short circuit point on the addressable loop (ALU). The internal relay will be triggered to cut down the line power where the short trouble is detected. VIEW DATASHEET ISOLATION MODULE The FW851 is a UL listed product according to UL864 and ULC-S527 for Fire Protective Signaling Systems for indoor use. Capabilities The FW851 does not occupy an address on the Fire Alarm Control Panel’s ALU. Compliance UL864 / ULC S527 / FM Listed LED Indicator The device LED will indicate the trouble condition by yellow steady on. When the trouble is cleared, the internal relay will restore the power line and the device’s LED will indicate normal operation. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmor.com Phone: +1 (888) 257-7718 Voltage Range: 15 to 28VDC Operating Temperature: 32°F to 120°F (0°C to 49°C) Operating Humidity: 0% to 93% RH Mounting: FW800 Base

FW521 ADDRESSABLE HEAT DETECTOR It responds quickly and dependably to a broad range of fires. Thanks to its Microcontroller Unit (MCU), Maple Armor heat detector makes a complete comprehensive self-diagnostic test and result analysis. VIEW DATASHEET HEAT DETECTOR The Heat Detector FW521 is addressable, intelligent and UL and ULC listed device according to UL 521 and ULC-S530 for Fire Protective Signaling Systems for indoor use with both fixed-temperature alarm and rate-of-rise alarm characteristics. Capabilities The FW521 is intelligent, addressable, and takes one address on the Signaling Line Circuit (SLC) of the fire alarm control panel. Compliance UL/ULC/FM/FCC Listed Design The heat detector has a slim design that combines visual appeal with a high standard of reliability. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmor.com Phone: +1 (888) 257-7718 The heat fire alarm has a Microcontroller Unit (MCU) performing comprehensive self-diagnostic tests, and result analysis. Voltage Range: 17.6 to 25.5VDC Fixed Temperature Rating: 135°F (57.5°C) Rate-of-Rise Detection: 15°F min. (8.3°C min.) Ceiling Mounting

6-FM-5 12V5Ah VIEW DATASHEET MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

6-FM-7 12V7Ah VIEW DATASHEET MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW859 IN-SUITE ISOLATOR MODULE The FW859 In-Suite Isolator module is designed for residential and hospitality-based applications. The In-Suite Isolator can detect a short circuit condition on a Class A circuit that covers a suite by electrically isolating the wiring. VIEW DATASHEET IN-SUITE ISOLATOR MODULE The FW859 In-Suite Isolator Module is designed for installations where disconnection of, or damage to an in-suite audible device will not interfere with the ability of audible devices in other dwelling units, public corridors, or suites to sound on an alarm. Capacity The FW859 provides two supervised isolator outputs. Under this configuration, if the in-suite audible device has an open circuit, the fire control panel will indicate zone trouble Compliance UL/ULC Listed Installation The FW859 mounts in a 4” square electrical box. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmor.com Phone: +1 (888) 257-7718 Up to two Class A/B outputs Supervised and isolated outputs 200ma per output White surface box available

FW562 ADDRESSABLE DUCT DETECTOR The FW562 is a Photoelectric duct smoke detector designed to provide early detection of smoke and/or the presence of combustion products in ventilation systems. VIEW DATASHEET DUCT SMOKE DETECTOR The FW562C detector operates at temperatures from 0ºC to 49ºC (32ºF to 120ºF), can stand relative humidity levels of 0 to 93% and support 300 to 4000 ft/min of air velocity. Capabilities Designed to provide early detection of smoke and/or the presence of combustion products in ventilation systems. Compliance FW562-A/B/C are UL-listed devices according to UL 268A FW562C-A/B/C are ULC listed according to ULC-S529 for fire protection systems. Addressable Equipped with a photoelectric smoke detector, the units will signal the presence of a dangerous amount of combustion product in the ventilation system. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmor.com Phone: +1 (888) 257-7718 Voltage Range: 17.6 to 28VDC Compatible with Maple Armor control panels FW105 and FW106 Operating Temperature: 32°F to 100°F (0°C to 38°C) Operating Humidity: 0% to 93% RH Mounting Location: Side and Top

FW983AG ADDRESSABLE MULTI CANDELA STROBE DEVICE Maple Armor strobe appliances produce a flash rate of one flash per second over the Regulated Voltage Range. VIEW DATASHEET ADDRESSABLE STROBE The FW983AG Fire Alarm Strobe is part of a family of addressable multi-candela visual and audible signal appliances with light sources generated from a white LED, listed according to UL 1971, UL 1638, UL 464, ULC-S525 and ULC-S526 for indoor use. Capabilities Each Fire alarm Strobe has the intelligence to report its location (the device address) and status to the FireWatcher series fire alarm control panels. Compliance UL/ULC/FM/FCC Listed Output Six levels of light output are selectable. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmor.com Phone: +1 (888) 257-7718 The LED light source in the strobe offers superior performance, including low power consumption and long operating life. The signaling device has the feature that can synchronize multiple horns and/or strobes in a complete fire alarm system. Wall or Ceiling Mounting

FW6000-B672 VIEW DATASHEET MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW6000-B12550 VIEW DATASHEET MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FIRE ALARM BATTERIES Maple Armor offers a great variety of rechargeable batteries for your next fire alarm project application. They come with an 18 month factory warranty. ABOUT OUR PRODUCTS Maple Armor provides you with nothing but reliable, robust and cost-effective fire alarm devices. All our equipment is UL, ULC, FCC listed as well as FM approved and conform to the highest standards of life safety and property loss prevention. LEARN MORE

6-GFM-26 12V26Ah VIEW DATASHEET MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FIRE ALARM INTELLIGENT MODULES Maple Armor provides you with a wide range of easy-to-use fire alarm modules. Our fire alarm modules are FM, UL, and ULC listed devices for fire protection and fire signaling systems. ABOUT OUR PRODUCTS Maple Armor provides you with nothing but reliable, robust and cost-effective fire alarm devices. All our equipment is UL, ULC, FCC listed as well as FM approved and conform to the highest standards of life safety and property loss prevention. LEARN MORE FW434 MODULE BOX 2 mounting plates on hinges Accommodates up to 16 regular modules per box Accommodates up to 64 mini modules per box Integrated flange for semi-flush installation Available in Red and Dark Gray colors LEARN MORE FW435 MODULE BOX 2 mounting plates on hinges Accommodates up to 8 regular modules per box Accommodates up to 32 mini modules per box Integrated flange for semi-flush installation Available in Red and Dark Gray colors LEARN MORE FW811 INPUT MODULE Input module that monitors a single dry contact UL/ULC listed device according to UL864 and ULCS527 for fire protective signaling systems for indoor use The field circuit is monitored for open line faults and ground faults and the contact must be wired with an end of line resistor LEARN MORE FW811M MINI-INPUT MODULE Input module that monitors a single dry contact UL/ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use The field circuit is monitored for open line faults and ground faults and the contact must be wired with an end of line resistor LEARN MORE FW812 DUAL INPUT MODULE Internal electronic address Compatible with EOLR 10K Ohms (FW421) White Surface box available as an option (FW800/801) 4 types of input contact 2 Status LED indicators Supports two Class B input circuits LEARN MORE FW821 I/O MODULE Input-Output module UL / ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use Provides one 24VDC output and in addition monitoring for one feedback input contact LEARN MORE FW831 RELAY MODULE UL / ULC listed product according to UL864 and ULC-S527 for fire protective signaling systems for indoor use Provides two control relay outputs which will be activated simultaneously LEARN MORE FW841 CONV. ZONE MODULE 2-wire CLASS A/B conventional detectors Counts for 35 unit loads White surface box available as an option (FW800/801) Status LED indicator It is a UL listed product according to UL864 and ULC-S527 LEARN MORE FW851 ISOLATOR MODULE The isolation module isolates the short point on the signaling line circuit (SLC) The internal relay will be triggered to cut down the line power where the short trouble is detected LEARN MORE FW859 IN-SUITE ISOLATOR MODULE Up to two Class A/B outputs Supervised and isolated outputs 200ma per output White surface box available as an option (FW800/801) No LED indicator LEARN MORE FW951 SYNC MODULE Sync Module is a device designed with FW962/FW971/FW982 Horn and/or Strobe Built-in synchronization circuit to synchronize multiple FW961s in a complete fire alarm system Up to 64 Notification Appliance Circuits (NAC), networked, stand alone or interfacing with the FW951 LEARN MORE