FW982 MULTI CANDELA STROBE The FW982 strobe produces a flash rate of one flash per second over the Regulated Voltage Range. It offers superior performance, including low power consumption and long operating life. VIEW DATASHEET MULTI-CANDELA STROBE The FW982 Fire Alarm Strobe is part of a family of multi-candela visual and/or audible signal appliances with light sources generated from white Light Emitting Diodes (LEDs), listed according to UL 1971, UL 1638, UL 464, ULC-S525, and ULC-S526 for indoor use. Capabilities The LED light source in this fire alarm strobe offers superior performance, including low power consumption and long operating life. Compliance UL/ULC Listed Output Five levels of light output are selectable. The default setting is highest level. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 The strobe alarm is equipped with a function to synchronize multiple strobes within a complete fire alarm system. Wall or Ceiling Mounting

FW6000-B6120 ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW811 FIRE ALARM INPUT MODULE It is an intelligent addressable module and takes one address on the Signaling Line Circuit (SLC) of the fire alarm control panel. VIEW DATASHEET FIRE ALARM INPUT MODULE The input module FW811 monitors a single dry contact and is a UL/ULC listed device according to UL864 and ULCS527 for fire protective signaling systems for indoor use. Capabilities The FW811 input module can be configured to be a supervisory, trouble or monitor signal which will produce an event when a signal input appears on its associated contact. The device LED will indicate the event condition by red steady on. Compliance UL864 / ULC S527 Alarm Events An module input will produce an ALARM event when an alarm generating contact device is activated. The device LED will indicate the alarm condition by red steady on. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Compatible with 10K Ohms end of line resistor (FW421) Surface mount with FW800/FW801 base

ADDRESSABLE FIRE ALARM PANELS Maple Armor Technologies supplies you with intelligent and addressable fire alarm control panels that are ideally suited for both new and retrofit commercial, institutional, residential and industrial fire detection and notification applications. ABOUT OUR PRODUCTS Maple Armor provides you with nothing but reliable, robust and cost-effective fire alarm devices. All our equipment is UL, ULC, FCC listed as well as FM approved and conform to the highest standards of life safety and property loss prevention. LEARN MORE FW106S FIRE ALARM CONTROL PANEL Addressable Fire Alarm Control Panel Designed for small and medium scale facilities Suited for both new and retrofit commercial, institutional and industrial fire detection and notification applications. It can support up to 252 Addressable Devices , 2-4 Notification Circuits and 5 Form C Relay Compatible with XNU FW357 Network Card LEARN MORE FW131 ADDRESSABLE NAC BOOSTER 8 Class A or B signaling circuits with a max of 3A per NAC circuit 12A Compact Switching power supply 110 – 120 VAC 60Hz, or 220 – 240 VAC 50Hz 10A power dedicate to signaling circuits 1A Auxiliary power output 4 form C dry relay contacts 3 ways to connect between panels and NAC Boosters – via SLC, via CAN and Pass Through LEARN MORE FW106 FIRE ALARM CONTROL PANEL Addressable Fire Alarm Control Panel Designed for small, medium and large scale facilities Suited for both new and retrofit commercial, institutional and industrial fire detection and notification applications. It can support up to 1008 Addressable Devices , 10 Notification Circuits and 5 Form C Relay Compatible with XNU FW357 Network Card LEARN MORE FW105 ADDRESSABLE FIRE ALARM PANEL Addressable Fire Alarm Control Panel Designed for small and medium scale facilities Built-in 30 LED/buttons annunciator It can support up to 252 Addressable Devices , 4 to 8 Notification Circuits and 5 Form C Relay 6 auxiliary function buttons and 12 LED indicators. LEARN MORE

FW859 IN-SUITE ISOLATOR MODULE The FW859 In-Suite Isolator module is designed for residential and hospitality-based applications. The In-Suite Isolator can detect a short circuit condition on a Class A circuit that covers a suite by electrically isolating the wiring. VIEW DATASHEET IN-SUITE ISOLATOR MODULE The FW859 In-Suite Isolator Module is designed for installations where disconnection of, or damage to an in-­suite audible device will not interfere with the ability of audible devices in other dwelling units, public corridors, or suites to sound on an alarm. Capacity The FW859 provides two supervised isolator outputs. Under this configuration, if the in-­suite audible device has an open circuit, the fire control panel will indicate zone trouble Compliance UL/ULC Listed Installation The FW859 mounts in a 4” square electrical box. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Up to two Class A/B outputs Supervised and isolated outputs 200ma per output White surface box available

FW6000-B650 ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

FW963 ADDRESSABLE MULTI-CANDELA HORN/STROBE This horn/strobe notification device has the intelligence to report its location (the device address) and status to the FireWatcher series fire alarm control panels. Six levels of light output are selectable. VIEW DATASHEET ADDRESSABLE MULTI-CANDELA HORN/STROBE The FW963AG Horn/Strobe is an addressable multi-candela visual and audible signal appliances with light sources generated from a white LED, listed according to UL 1971, UL 1638, UL 464, ULC-S525 and ULC-S526. Capabilities The temporal tone generated by the horn portion is designed as per ANSI and NFPA72 for standard emergency evacuation signaling requirements. Compliance UL/ULC listed Power Usage The LED light source offers superior performance, including low power consumption and long operating life. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 The strobe appliances produce a flash rate of one flash per second over the Regulated Voltage Range. The appliance has the feature that can synchronize multiple horns and/or strobes in a complete fire alarm system. Wall or Ceiling Mounting

FW821 FIRE ALARM I/O MODULE The input-output module FW821 is a UL / ULC listed device according to UL864 and ULC-S527 for fire protection signaling systems for indoor use. VIEW DATASHEET FIRE ALARM I/O MODULE The input line is monitored for open line faults and ground faults, and the contact must thus be wired with an end-of-line resistor. The output line is monitored for open lines, short-circuit faults, ground faults, and external 24VDC power source loss. Capabilities The FW821 input-output module provides one 24VDC output and one feedback input monitor. Compliance UL864 / ULC S527 / FM Listed Addressable The FW821 is an intelligent addressable module and takes one address on the Signaling Line Circuit (SLC) or Data Communication Link (DCL) of the fire alarm control panel. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Useful to confirm a retroactive action Internal electronic address Compatible with EOLR 10K Ohms (FW421) White surface box available as an option (FW800/801) Status LED indicator

FW106S FIRE ALARM CONTROL PANEL The FW106S is an addressable Fire Alarm Control Panel designed for small scale facilities. It is ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications. VIEW DATASHEET FIRE ALARM CONTROL PANEL A state-of-the-art addressable fire control system that meets the requirements of UL864 10th edition, and ULC S527. It can support 1 addressable loop unit and 252 addressable devices/points, with 2 to 4 Notification Appliance Circuits and 5 form C dry relay contacts. FW106S (DG) Addressable Fire Control Panel (Grey) FW433 - TRIM Capabilities Intelligent Fire Alarm Control Panel designed for small scale facilities Compliance UL/ULC listed according to UL864 10th edition and ULC-S527 3rd edition Addressable Devices Supports 1 addressable loop circuit and 252 addressable devices/points. MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718 Ideally suited for both new and retrofit commercial, institutional, and industrial fire detection and notification applications. Supports 2 to 4 Notification Appliance Circuits and 5 form C dry relay contacts. Supports 109 remote annunciators. Includes a 7” color LCD display with 800×480 resolution, 6 auxiliary function keys and 9 LED indicators making it a highly intuitive fire-alarm user interface PAS (positive alarm sequence) Two-stage Alarm (ULC) Alarm verification Silence Inhibitor Trouble/Supervisory Resound Simultaneous display of active events on large graphic LCD Fully programmable from the front panel

FW6000-B12180 ​ ​ VIEW DATASHEET ​ ​ ​ ​ ​ ​ ​ ​ MORE FEATURES DOCUMENTATION SOFTWARE Datasheet and Installation Manuals Case Studies / Projects Maple Armor Case Studies Customer Support Email: sales@maplearmorgroup.com Phone: +1 (888) 257-7718

DISPLAY PACKAGES Maple Armor offers its ESDs and Partners three unique product display options, including a Demo Box. DOWNLOAD PDF DEMO PACKAGE 1 DEMO BOX WITH TOOL BOX DEMO PACKAGE 2 ASSORTED DEVICES (ORANGE) DEMO PACKAGE 3 ASSORTED DEVICES (RED) DEMO PACKAGE 2 FOR DISPLAY/DEMONSTRATION PURPOSES ONLY NOT FOR RESALE OFF-RED COLOR PANEL, DEVICES, AND ACCESSORIES Available to all our ESD and partners. Please contact us for more details or pricing information. DEMO PACKAGE 3 FOR DISPLAY/DEMONSTRATION PURPOSES ONLY NOT FOR RESALE OFF-RED COLOR PANEL, DEVICES, AND ACCESSORIES Available to all our ESD and partners. Please contact us for more details or pricing information.

FIRE ALARM MODULES Maple Armor provides you with a wide range of easy-to-use fire alarm modules. Our fire alarm modules are FM, UL, and ULC listed devices for fire protection and fire signaling systems. ABOUT OUR PRODUCTS Maple Armor provides you with nothing but reliable, robust and cost-effective fire alarm devices. All our equipment is UL, ULC, FCC listed as well as FM approved and conform to the highest standards of life safety and property loss prevention. LEARN MORE FW859 SYNC MODULE Sync Module is a device designed with FW961/FW971/FW981 Horn and/or Strobe Built-in synchronization circuit to synchronize multiple FW961s in a complete fire alarm system Up to 64 Notification Appliance Circuits (NAC), networked, stand alone or interfacing with the FW951 LEARN MORE FW951 IN-SUITE ISOLATOR MODULE Up to two Class A/B outputs Supervised and isolated outputs 200ma per output White surface box available as an option (FW800/801) No LED indicator LEARN MORE FW851 ISOLATOR MODULE The isolation module isolates the short point on the signaling line circuit (SLC) The internal relay will be triggered to cut down the line power where the short trouble is detected LEARN MORE FW841 CONV. ZONE MODULE 2-wire CLASS A/B conventional detectors Counts for 35 unit loads White surface box available as an option (FW800/801) Status LED indicator It is a UL listed product according to UL864 and ULC-S527 LEARN MORE FW831 RELAY MODULE UL / ULC listed product according to UL864 and ULC-S527 for fire protective signaling systems for indoor use Provides two control relay outputs which will be activated simultaneously LEARN MORE FW821 I/O MODULE Input-Output module UL / ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use Provides one 24VDC output and in addition monitoring for one feedback input contact LEARN MORE FW812 DUAL INPUT MODULE Internal electronic address Compatible with EOLR 10K Ohms (FW421) White Surface box available as an option (FW800/801) 4 types of input contact 2 Status LED indicators Supports two Class B input circuits LEARN MORE FW811M MINI-INPUT MODULE Input module that monitors a single dry contact UL/ULC listed device according to UL864 and ULC-S527 for fire protective signaling systems for indoor use The field circuit is monitored for open line faults and ground faults and the contact must be wired with an end of line resistor LEARN MORE FW811 INPUT MODULE Input module that monitors a single dry contact UL/ULC listed device according to UL864 and ULCS527 for fire protective signaling systems for indoor use The field circuit is monitored for open line faults and ground faults and the contact must be wired with an end of line resistor LEARN MORE FW435 MODULE BOX 2 mounting plates on hinges Accommodates up to 8 regular modules per box Accommodates up to 32 mini modules per box Integrated flange for semi-flush installation LEARN MORE FW434 MODULE BOX 2 mounting plates on hinges Accommodates up to 16 regular modules per box Accommodates up to 64 mini modules per box Integrated flange for semi-flush installation LEARN MORE